For example, if a locomotive's maximum sustained motor current is over 0.5A, this plug and socket should not be used. This decoder is compatible with the NEM651 standard interface found in some N-scale Bachmann and Fox Valley Models locomotives. This circuitry will already be present in a DCC-ready locomotive equipped with a 6-pin socket and headlights. The contact ratings are for the individual pins of the connector only and do not reflect the capabilities of a particular decoder or requirements of a particular locomotive. NEM 651/ Six Pin Plug. Pin 1 should be clearly marked on the plug and socket with a small triangle or dot. 14 x 9 x 2,5 mm, 0,8 A constant current, 1,5A peak current (ca. The plug is integrated into the decoder. The 6-pin connector has the following specifications: 1 Amp Series 6 NEM 651 Plug Decoder with 4 Functions that fits Many N & HO Locomotives. The pin out is as follows: Pin 1 Motor Right. more info on Z Scale Direct Plug-in Decoder... Only 1 remaining in stock Installation: 6 Pin NEM 651 Plug. Note that there is no common positive supply wire for the headlights, the headlights are supplied by rectifying the supply from the rails as shown below. Lieferbar solange der Vorrat reicht.Sound-Lokdecoder mit Fahrsound und passenden Zusatzgeräuschen Home / Decoders & Installation / DCCconcepts Connectors, Relays, Adapters & Other Decoder Harnesses / NEM652 8 Pin Plug to 6 Pin NEM651 Socket Harness (3 Pack) Price: £ 9.96 Tax Free A pack of three 8-pin harnesses to fit direct plug 6-pin decoders. The NEM 651 or 6 Pin DCC Plug is one of the standard plugs used for Locomotive Interfaces.The plug is integrated into the decoder (or possibly on the end of a loose wiring harness) and mates with a fixed 6 hole socket mounted on the locomotive chassis. Quiet Drive: Super-quiet motor control for "buzz" free motor performance. The locomotive side is a 1x6 female socket with 0.05" pitch. TCS EU621 decoder with MTC21 interface (photo: TCS) Next18 (NEM-662) is meant as a successor to the NEM-651 6-pin interface, eliminating the contact and compatibility problems of the 6-pin interface and to overcome the problem of the space consuming long pins of the PluX designs. Made in the USA. Feedback-enabled decoder for N / TT gauge, NEM 651 direct. NCE N12-NEM 651 Shown larger than life size, this is the 6 pin, full featured 4 function, decoder that fits Arnold Hornsby, Fox Valley GE GEVO and GP60's. Back EMF Load Compensation: Provides superior slow speed control and high performance under load. Decoder für alle - auch für Ihre Loks Multiprotokoll (DCC und Motorola), Rückmeldung über RailCom, richtungsabhängiges Schalten der Ausgänge, Rangierfunktion und noch ein bisschen "Kleinkram": das ist Standard bei unseren Lokdecodern der 30-er Serie. See NEM 652/NMRA 8 Pin DCC Plug for the 8 pin variety . Multiprotokoll (DCC und Motorola), Rückmeldung über RailCom, diverse Effekte für die Ausgänge, ein Schalteingang zum automatisierten Auslösen von Funktionen, Rangierfunktion und noch ein bisschen "Kleinkram": das ist Standard bei unseren ... und vieles ist auch für Reparatur und Wartung von Wagen geeignet!Auslaufprodukt zum Sonderpreis. 20 ms), 4 function exits, current limit for the function exits: total: 0,5 A, 2 logic level exits, 2 servo control lines, SUSI,DCC, MM, RailCom* and much more. Current Rating - Avg 1 Amps , Peak 1.5 Amps Connector - NEM 651 Size - 14.2 x 9.8 x 3.48 (mm) Functions - 4 BEMF - Yes. (See features listed above) It is bargain priced at $11.51 cheaper than the TCS EUN 651. This small 6 pin interface is used mostly for N scale locomotives due to their small size.