Failing to isolate the motor terminals from the rail connections will destroy your decoder. Colour coded wiring to match MOROP/NMRA standards. Decoders and locomotives with or without pin 3 in use should be interchangeable, i.e. Our Price £ 19.00. length of wire is approx 300mm and is high quality 7/0.20mm wire on th 8 pin and 7/0.13 on the 6 pin, both with a max voltage of 1000v .

Summary: The NEM 652 or 8 Pin DCC Plug is one of the standard plugs used for Locomotive Interfaces.The plug is on the end of a loose wiring harness coming from the decoder and mates with a fixed female socket mounted on the locomotive chassis. These take up a lot of space in an N-scale model, and I haven’t used them so I don’t have anything further to say about them.

Add to basket.

DCC Digital Command Control Help + other items of help for Railway ModellersNEM 652 is a medium size decoder interface designed mainly for OO/HO use.The table below shows the 8 pins and the related colour codes for wired decodersThe DIGITAL plus STANDARD locomotive decoder is suitable for all DCSuper smooth and silent high frequency back-emf motor control.Selectable for operation with 14/27, or 28/128 speed steps.Operation on conventional DC layouts is possible or can be disabled.Four function outputs rated at 150mA each with advanced function mappingFunction outputs can be set to a timer for electronic uncouplingDirectional or independent lighting with dimming and special effects.Support for programming on the mainline (Programming on Main POM)Support for all forms of programming as described in NMRA RP-9.2.3The DIGITAL plus SILVER locomotive decoder has a built in NMRA 8 pin plug and is suitable for all DC locomotives with continuous current draw of 1.0 Amp. This plug must be removed before installing the decoder and must be replaced if removing the decoder and returning it to Pin 1 should be clearly marked on the plug and socket with a small triangle or dot. The 8 pin version is known as the medium size and is the most common standard DCC connector used in HO and OO locomotives. When soldering wires onto the connector, use the cup side. A brand new pre-wired 8-pin DCC decoder plug; NMRA and NEM652-compliant. The DMM display should indicate an open circuit (infinite (∞) resistance) on all the above combinations. No. The contact ratings are for the individual pins of the connector only and do not reflect the capabilities of a particular decoder or requirements of a particular locomotive. Tin plated brass pin and sockets for excellent conductivity.

Half the amount of fiddly DCC wiring/soldering with a wired plug that’s all ready to go. Connector - NEM 652 (Wires) Size - 11.56 x 9.37 x 3.2 (mm) Functions - 2 (0.5Amps Total Max) BEMF - Yes.

Super smooth and silent high frequency back-emf motor control.USP with optional power module for operation on dirty trackSelectable for operation with 14/27, or 28/128 speed steps.Operation on conventional DC layouts is possible or can be disabled.Motor output = 1A continuous, 1.8A max, > 5 A stall.Four function outputs rated at 200mA each with advanced function mappingDirectional or independent lighting with dimming and special effects.Support for programming on the mainline (Programming on Main POM)Support for all form of programming as described in NMRA RP-9.2.3Size: L 0.91" x W 0.66"x H 0.2" L 23.0 mm x W 16.5 mm x H 6.5 mm

NEM 652 is a medium size decoder interface designed mainly for OO/HO use. DZ126T. Super smooth and silent high frequency back-emf motor control.Selectable for operation with 14/27, or 28/128 speed steps.Operation on conventional DC layouts is possible or can be disabled.Motor output = 1A continuous, 1.8A max, > 5 A stall.Four function outputs rated at 100mA each with advanced function mapping.Directional or independent lighting with dimming and special effects.Support for programming on the mainline (Programming on Main POM)Support for all form of programming as described in NMRA RP-9.2.3The DIGITAL plus GOLD locomotive decoder is suitable for all DC locomotives with continuous current draw of 1.0 Amp. Be the first to Write a Review for this item! 6-pin miniature sound decoder (NEM 651) Art. Type: 8-Pin Male DCC Plug Wire Length: ~100mm / ~4.0″ NMRA Standard: NEM652. a decoder without an F1 output can be used in a locomotive with an F1 input (but the function won't work) and a decoder with an F1 output can be used in a locomotive with an F1 input (but the function won't do anything). The 8-pin connector has the following specifications:

: 687701: € 106,90

£1.65.

Description Low profile 8 Pin NEM 652 DCC decoder plug or socket, dependant on where you solder the wires, that enables you to make your own decoder harness. NEM 652 plug New Lenz updated Standard Decoder replaces the 10231-01 Manual in German, English and French

or less that have a DCC Medium plug socket.

Low Profile 8 Pin NEM 652 DCC Decoder Plug or Socket Model Number: 218-024 Stock Number: 0791111033246. Related Products : Quick View.

8 pin dcc decoder socket wiring harness to nem 652 and . For example, if a locomotive's maximum sustained motor current is over 1.5A, this plug and socket should not be used. and with a current rating of 1.4a the socket is fitted to a circuit board with the wire attached to the pins, the pins are . If using an analog ohmmeter, the needle should not move.

It is possible that, while the manufacturer has installed an 8 pin interface, it is wired incorrectly.

In the case of a 'three function' or 'four function' decoder with an 8-pin plug there may be a green F1 (Function 1) wire connected to Pin 3, although this is not required by the standard specification.